How do you write focus group questions?

As a rule of thumb, questions related to thoughts, beliefs, and feelings work well in focus groups. Take your time formulating strong questions, paying special attention to phrasing. Be careful to avoid leading questions, which can bias your responses.

Overall, your focus group questions should be:

Open-ended and flexible
Impossible to answer with ‘yes’ or ‘no’ (questions that start with ‘why’ or ‘how’ are often best)
Unambiguous, getting straight to the point while still stimulating discussion
Unbiased and neutral

Frequently asked questions: Methodology

What is the difference between quantitative and qualitative observations?: Quantitative observations involve measuring or counting something and expressing the result in numerical form, while qualitative observations involve describing something in non-numerical terms, such as its appearance, texture, or color.
How do you make quantitative observations?: To make quantitative observations, you need to use instruments that are capable of measuring the quantity you want to observe. For example, you might use a ruler to measure the length of an object or a thermometer to measure its temperature.
How do I determine scope of research?: Scope of research is determined at the beginning of your research process, prior to the data collection stage. Sometimes called “scope of study,” your scope delineates what will and will not be covered in your project. It helps you focus your work and your time, ensuring that you’ll be able to achieve your goals and outcomes.

Defining a scope can be very useful in any research project, from a research proposal to a thesis or dissertation. A scope is needed for all types of research: quantitative, qualitative, and mixed methods.

To define your scope of research, consider the following:

Budget constraints or any specifics of grant funding

Your proposed timeline and duration

Specifics about your population of study, your proposed sample size, and the research methodology you’ll pursue

Any inclusion and exclusion criteria

Any anticipated control, extraneous, or confounding variables that could bias your research if not accounted for properly.
What type of sampling uses inclusion and exclusion criteria?: Inclusion and exclusion criteria are predominantly used in non-probability sampling. In purposive sampling and snowball sampling, restrictions apply as to who can be included in the sample.
Where do I present inclusion and exclusion criteria?: Inclusion and exclusion criteria are typically presented and discussed in the methodology section of your thesis or dissertation.
Why is ecological validity not prioritised in studies conducted in theory-testing mode?: The purpose of theory-testing mode is to find evidence in order to disprove, refine, or support a theory. As such, generalisability is not the aim of theory-testing mode.

Due to this, the priority of researchers in theory-testing mode is to eliminate alternative causes for relationships between variables. In other words, they prioritise internal validity over external validity, including ecological validity.
What is the difference between convergent and concurrent validity?: Convergent validity shows how much a measure of one construct aligns with other measures of the same or related constructs.

On the other hand, concurrent validity is about how a measure matches up to some known criterion or gold standard, which can be another measure.

Although both types of validity are established by calculating the association or correlation between a test score and another variable, they represent distinct validation methods.
What are the main types of validity?: Validity tells you how accurately a method measures what it was designed to measure. There are 4 main types of validity:

Construct validity: Does the test measure the construct it was designed to measure?

Face validity: Does the test appear to be suitable for its objectives?

Content validity: Does the test cover all relevant parts of the construct it aims to measure.

Criterion validity: Do the results accurately measure the concrete outcome they are designed to measure?
What are the two types of criterion validity?: Criterion validity evaluates how well a test measures the outcome it was designed to measure. An outcome can be, for example, the onset of a disease.

Criterion validity consists of two subtypes depending on the time at which the two measures (the criterion and your test) are obtained:

Concurrent validity is a validation strategy where the the scores of a test and the criterion are obtained at the same time

Predictive validity is a validation strategy where the criterion variables are measured after the scores of the test
What is differential attrition?: Attrition refers to participants leaving a study. It always happens to some extent – for example, in randomised control trials for medical research.

Differential attrition occurs when attrition or dropout rates differ systematically between the intervention and the control group. As a result, the characteristics of the participants who drop out differ from the characteristics of those who stay in the study. Because of this, study results may be biased.
What is the difference between criterion validity and construct validity?: Criterion validity and construct validity are both types of measurement validity. In other words, they both show you how accurately a method measures something.

While construct validity is the degree to which a test or other measurement method measures what it claims to measure, criterion validity is the degree to which a test can predictively (in the future) or concurrently (in the present) measure something.

Construct validity is often considered the overarching type of measurement validity. You need to have face validity, content validity, and criterion validity in order to achieve construct validity.
Why are convergent and discriminant validity often evaluated together?: Convergent validity and discriminant validity are both subtypes of construct validity. Together, they help you evaluate whether a test measures the concept it was designed to measure.

Convergent validity indicates whether a test that is designed to measure a particular construct correlates with other tests that assess the same or similar construct.

Discriminant validity indicates whether two tests that should not be highly related to each other are indeed not related. This type of validity is also called divergent validity.

You need to assess both in order to demonstrate construct validity. Neither one alone is sufficient for establishing construct validity.
In what ways are content and face validity similar?: Face validity and content validity are similar in that they both evaluate how suitable the content of a test is. The difference is that face validity is subjective, and assesses content at surface level.

When a test has strong face validity, anyone would agree that the test’s questions appear to measure what they are intended to measure.

For example, looking at a 4th grade math test consisting of problems in which students have to add and multiply, most people would agree that it has strong face validity (i.e., it looks like a math test).

On the other hand, content validity evaluates how well a test represents all the aspects of a topic. Assessing content validity is more systematic and relies on expert evaluation. of each question, analysing whether each one covers the aspects that the test was designed to cover.

A 4th grade math test would have high content validity if it covered all the skills taught in that grade. Experts(in this case, math teachers), would have to evaluate the content validity by comparing the test to the learning objectives.
Why is content validity important?: Content validity shows you how accurately a test or other measurement method taps into the various aspects of the specific construct you are researching.

In other words, it helps you answer the question: “does the test measure all aspects of the construct I want to measure?” If it does, then the test has high content validity.

The higher the content validity, the more accurate the measurement of the construct.

If the test fails to include parts of the construct, or irrelevant parts are included, the validity of the instrument is threatened, which brings your results into question.
What’s the difference between content and construct validity?: Construct validity refers to how well a test measures the concept (or construct) it was designed to measure. Assessing construct validity is especially important when you’re researching concepts that can’t be quantified and/or are intangible, like introversion. To ensure construct validity your test should be based on known indicators of introversion (operationalisation).

On the other hand, content validity assesses how well the test represents all aspects of the construct. If some aspects are missing or irrelevant parts are included, the test has low content validity.
Why are convergent and discriminant validity often evaluated together?: Convergent validity and discriminant validity are both subtypes of construct validity. Together, they help you evaluate whether a test measures the concept it was designed to measure.

Convergent validity indicates whether a test that is designed to measure a particular construct correlates with other tests that assess the same or similar construct.

Discriminant validity indicates whether two tests that should not be highly related to each other are indeed not related

You need to assess both in order to demonstrate construct validity. Neither one alone is sufficient for establishing construct validity.

Construct validity has convergent and discriminant subtypes. They assist determine if a test measures the intended notion.
How can you ensure reproducibility and replicability?: The reproducibility and replicability of a study can be ensured by writing a transparent, detailed method section and using clear, unambiguous language.
Why are reproducibility and replicability important?: Reproducibility and replicability are related terms.

A successful reproduction shows that the data analyses were conducted in a fair and honest manner.

A successful replication shows that the reliability of the results is high.
What’s the difference between reproducibility and replicability?: Reproducibility and replicability are related terms.

Reproducing research entails reanalysing the existing data in the same manner.

Replicating (or repeating) the research entails reconducting the entire analysis, including the collection of new data.
Is snowball sampling random?: Snowball sampling is a non-probability sampling method. Unlike probability sampling (which involves some form of random selection), the initial individuals selected to be studied are the ones who recruit new participants.

Because not every member of the target population has an equal chance of being recruited into the sample, selection in snowball sampling is non-random.
Is snowball sampling quantitative or qualitative?: Snowball sampling is a non-probability sampling method, where there is not an equal chance for every member of the population to be included in the sample.

This means that you cannot use inferential statistics and make generalisations – often the goal of quantitative research. As such, a snowball sample is not representative of the target population, and is usually a better fit for qualitative research.
Is snowball sampling biased?: Snowball sampling relies on the use of referrals. Here, the researcher recruits one or more initial participants, who then recruit the next ones.

Participants share similar characteristics and/or know each other. Because of this, not every member of the population has an equal chance of being included in the sample, giving rise to sampling bias.
When would it be appropriate to use a snowball sampling technique?: Snowball sampling is best used in the following cases:

If there is no sampling frame available (e.g., people with a rare disease)

If the population of interest is hard to access or locate (e.g., people experiencing homelessness)

If the research focuses on a sensitive topic (e.g., extra-marital affairs)
What is the difference between quota sampling and stratified sampling?: Stratified sampling and quota sampling both involve dividing the population into subgroups and selecting units from each subgroup. The purpose in both cases is to select a representative sample and/or to allow comparisons between subgroups.

The main difference is that in stratified sampling, you draw a random sample from each subgroup (probability sampling). In quota sampling you select a predetermined number or proportion of units, in a non-random manner (non-probability sampling).
What is the difference between random sampling and convenience sampling?: Random sampling or probability sampling is based on random selection. This means that each unit has an equal chance (i.e., equal probability) of being included in the sample.

On the other hand, convenience sampling involves stopping people at random, which means that not everyone has an equal chance of being selected depending on the place, time, or day you are collecting your data.
What is the difference between quota sampling and convenience sampling?: Convenience sampling and quota sampling are both non-probability sampling methods. They both use non-random criteria like availability, geographical proximity, or expert knowledge to recruit study participants.

However, in convenience sampling, you continue to sample units or cases until you reach the required sample size.

In quota sampling, you first need to divide your population of interest into subgroups (strata) and estimate their proportions (quota) in the population. Then you can start your data collection, using convenience sampling to recruit participants, until the proportions in each subgroup coincide with the estimated proportions in the population.
What is a sampling frame?: A sampling frame is a list of every member in the entire population. It is important that the sampling frame is as complete as possible, so that your sample accurately reflects your population.
What is the difference between stratified and cluster sampling?: Stratified and cluster sampling may look similar, but bear in mind that groups created in cluster sampling are heterogeneous, so the individual characteristics in the cluster vary. In contrast, groups created in stratified sampling are homogeneous, as units share characteristics.

Relatedly, in cluster sampling you randomly select entire groups and include all units of each group in your sample. However, in stratified sampling, you select some units of all groups and include them in your sample. In this way, both methods can ensure that your sample is representative of the target population.
What is a sampling method?: When your population is large in size, geographically dispersed, or difficult to contact, it’s necessary to use a sampling method.

This allows you to gather information from a smaller part of the population, i.e. the sample, and make accurate statements by using statistical analysis. A few sampling methods include simple random sampling, convenience sampling, and snowball sampling.
What are the two main types of social desirability bias?: The two main types of social desirability bias are:

Self-deceptive enhancement (self-deception): The tendency to see oneself in a favorable light without realizing it.

Impression managemen t (other-deception): The tendency to inflate one’s abilities or achievement in order to make a good impression on other people.
What is the definition of response bias?: Response bias refers to conditions or factors that take place during the process of responding to surveys, affecting the responses. One type of response bias is social desirability bias.
What’s the difference between demand characteristics and social desirability bias?: Demand characteristics are aspects of experiments that may give away the research objective to participants. Social desirability bias occurs when participants automatically try to respond in ways that make them seem likeable in a study, even if it means misrepresenting how they truly feel.

Participants may use demand characteristics to infer social norms or experimenter expectancies and act in socially desirable ways, so you should try to control for demand characteristics wherever possible.
Is a systematic review primary research?: A systematic review is secondary research because it uses existing research. You don’t collect new data yourself.
What are ethical considerations in research?: Ethical considerations in research are a set of principles that guide your research designs and practices. These principles include voluntary participation, informed consent, anonymity, confidentiality, potential for harm, and results communication.

Scientists and researchers must always adhere to a certain code of conduct when collecting data from others.

These considerations protect the rights of research participants, enhance research validity, and maintain scientific integrity.
Why do research ethics matter?: Research ethics matter for scientific integrity, human rights and dignity, and collaboration between science and society. These principles make sure that participation in studies is voluntary, informed, and safe.
What is research misconduct?: Research misconduct means making up or falsifying data, manipulating data analyses, or misrepresenting results in research reports. It’s a form of academic fraud.

These actions are committed intentionally and can have serious consequences; research misconduct is not a simple mistake or a point of disagreement but a serious ethical failure.
What’s the difference between anonymity and confidentiality?: Anonymity means you don’t know who the participants are, while confidentiality means you know who they are but remove identifying information from your research report. Both are important ethical considerations.

You can only guarantee anonymity by not collecting any personally identifying information – for example, names, phone numbers, email addresses, IP addresses, physical characteristics, photos, or videos.

You can keep data confidential by using aggregate information in your research report, so that you only refer to groups of participants rather than individuals.
What is the definition of peer review?: Peer review is a process of evaluating submissions to an academic journal. Utilising rigorous criteria, a panel of reviewers in the same subject area decide whether to accept each submission for publication.

For this reason, academic journals are often considered among the most credible sources you can use in a research project – provided that the journal itself is trustworthy and well regarded.
How does the peer review process work?: In general, the peer review process follows the following steps:

First, the author submits the manuscript to the editor.

The editor can either:

Reject the manuscript and send it back to author, or

Send it onward to the selected peer reviewer(s)

Next, the peer review process occurs. The reviewer provides feedback, addressing any major or minor issues with the manuscript, and gives their advice regarding what edits should be made.

Lastly, the edited manuscript is sent back to the author. They input the edits, and resubmit it to the editor for publication.
Why is peer review important?: Peer review can stop obviously problematic, falsified, or otherwise untrustworthy research from being published. It also represents an excellent opportunity to get feedback from renowned experts in your field.

It acts as a first defence, helping you ensure your argument is clear and that there are no gaps, vague terms, or unanswered questions for readers who weren’t involved in the research process.

Peer-reviewed articles are considered a highly credible source due to this stringent process they go through before publication.
What types of documents are usually peer-reviewed?: Many academic fields use peer review, largely to determine whether a manuscript is suitable for publication. Peer review enhances the credibility of the published manuscript.

However, peer review is also common in non-academic settings. The United Nations, the European Union, and many individual nations use peer review to evaluate grant applications. It is also widely used in medical and health-related fields as a teaching or quality-of-care measure.

Peer assessment is often used in the classroom as a pedagogical tool. Both receiving feedback and providing it are thought to enhance the learning process, helping students think critically and collaboratively.
What’s the difference between single-blind, double-blind and triple-blind studies?: In a single-blind study, only the participants are blinded.

In a double-blind study, both participants and experimenters are blinded.

In a triple-blind study, the assignment is hidden not only from participants and experimenters, but also from the researchers analysing the data.
Why is blinding important in research?: Blinding is important to reduce bias (e.g., observer bias, demand characteristics) and ensure a study’s internal validity.

If participants know whether they are in a control or treatment group, they may adjust their behaviour in ways that affect the outcome that researchers are trying to measure. If the people administering the treatment are aware of group assignment, they may treat participants differently and thus directly or indirectly influence the final results.
What is the definition of blinding in research?: Blinding means hiding who is assigned to the treatment group and who is assigned to the control group in an experiment.
What is the definition of explanatory research?: Explanatory research is a research method used to investigate how or why something occurs when only a small amount of information is available pertaining to that topic. It can help you increase your understanding of a given topic.
When should I use explanatory research?: Explanatory research is used to investigate how or why a phenomenon occurs. Therefore, this type of research is often one of the first stages in the research process, serving as a jumping-off point for future research.
What is the definition of exploratory research?: Exploratory research is a methodology approach that explores research questions that have not previously been studied in depth. It is often used when the issue you’re studying is new, or the data collection process is challenging in some way.
When should I use exploratory research?: Exploratory research is often used when the issue you’re studying is new or when the data collection process is challenging for some reason.

You can use exploratory research if you have a general idea or a specific question that you want to study but there is no preexisting knowledge or paradigm with which to study it.
How do you randomly assign participants to a group?: To implement random assignment, assign a unique number to every member of your study’s sample.

Then, you can use a random number generator or a lottery method to randomly assign each number to a control or experimental group. You can also do so manually, by flipping a coin or rolling a die to randomly assign participants to groups.
What’s the difference between random selection and random assignment?: Random selection, or random sampling, is a way of selecting members of a population for your study’s sample.

In contrast, random assignment is a way of sorting the sample into control and experimental groups.

Random sampling enhances the external validity or generalisability of your results, while random assignment improves the internal validity of your study.
When do you use random assignment?: Random assignment is used in experiments with a between-groups or independent measures design. In this research design, there’s usually a control group and one or more experimental groups. Random assignment helps ensure that the groups are comparable.

In general, you should always use random assignment in this type of experimental design when it is ethically possible and makes sense for your study topic.
What is the difference between clean and dirty data?: Clean data are valid, accurate, complete, consistent, unique, and uniform. Dirty data include inconsistencies and errors.

Dirty data can come from any part of the research process, including poor research design, inappropriate measurement materials, or flawed data entry.
When do you clean data?: Data cleaning takes place between data collection and data analyses. But you can use some methods even before collecting data.

For clean data, you should start by designing measures that collect valid data. Data validation at the time of data entry or collection helps you minimize the amount of data cleaning you’ll need to do.

After data collection, you can use data standardisation and data transformation to clean your data. You’ll also deal with any missing values, outliers, and duplicate values.
What is the definition of data cleaning?: Data cleaning involves spotting and resolving potential data inconsistencies or errors to improve your data quality. An error is any value (e.g., recorded weight) that doesn’t reflect the true value (e.g., actual weight) of something that’s being measured.

In this process, you review, analyse, detect, modify, or remove ‘dirty’ data to make your dataset ‘clean’. Data cleaning is also called data cleansing or data scrubbing.
Why does data cleaning matter?: Data cleaning is necessary for valid and appropriate analyses. Dirty data contain inconsistencies or errors, but cleaning your data helps you minimise or resolve these.

Without data cleaning, you could end up with a Type I or II error in your conclusion. These types of erroneous conclusions can be practically significant with important consequences, because they lead to misplaced investments or missed opportunities.
What is the definition of observer bias?: Observer bias occurs when a researcher’s expectations, opinions, or prejudices influence what they perceive or record in a study. It usually affects studies when observers are aware of the research aims or hypotheses. This type of research bias is also called detection bias or ascertainment bias.
What is the observer-expectancy effect?: The observer-expectancy effect occurs when researchers influence the results of their own study through interactions with participants.

Researchers’ own beliefs and expectations about the study results may unintentionally influence participants through demand characteristics.
How can I minimise observer bias in my research?: You can use several tactics to minimise observer bias.

Use masking (blinding) to hide the purpose of your study from all observers.

Triangulate your data with different data collection methods or sources.

Use multiple observers and ensure inter-rater reliability.

Train your observers to make sure data is consistently recorded between them.

Standardise your observation procedures to make sure they are structured and clear.
What are the pros and cons of naturalistic observation?: Naturalistic observation is a valuable tool because of its flexibility, external validity, and suitability for topics that can’t be studied in a lab setting.

The downsides of naturalistic observation include its lack of scientific control, ethical considerations, and potential for bias from observers and subjects.
What’s the definition of a naturalistic observation?: Naturalistic observation is a qualitative research method where you record the behaviours of your research subjects in real-world settings. You avoid interfering or influencing anything in a naturalistic observation.

You can think of naturalistic observation as ‘people watching’ with a purpose.
What’s the difference between closed-ended and open-ended questions?: Closed-ended, or restricted-choice, questions offer respondents a fixed set of choices to select from. These questions are easier to answer quickly.

Open-ended or long-form questions allow respondents to answer in their own words. Because there are no restrictions on their choices, respondents can answer in ways that researchers may not have otherwise considered.
How do you order a questionnaire?: You can organise the questions logically, with a clear progression from simple to complex, or randomly between respondents. A logical flow helps respondents process the questionnaire easier and quicker, but it may lead to bias. Randomisation can minimise the bias from order effects.
How do you administer questionnaires?: Questionnaires can be self-administered or researcher-administered.

Self-administered questionnaires can be delivered online or in paper-and-pen formats, in person or by post. All questions are standardised so that all respondents receive the same questions with identical wording.

Researcher-administered questionnaires are interviews that take place by phone, in person, or online between researchers and respondents. You can gain deeper insights by clarifying questions for respondents or asking follow-up questions.
What are the requirements for a controlled experiment?: In a controlled experiment, all extraneous variables are held constant so that they can’t influence the results. Controlled experiments require:

A control group that receives a standard treatment, a fake treatment, or no treatment

Random assignment of participants to ensure the groups are equivalent

Depending on your study topic, there are various other methods of controlling variables.
What’s the difference between a control group and an experimental group?: An experimental group, also known as a treatment group, receives the treatment whose effect researchers wish to study, whereas a control group does not. They should be identical in all other ways.
Do experiments always require a control group?: A true experiment (aka a controlled experiment) always includes at least one control group that doesn’t receive the experimental treatment.

However, some experiments use a within-subjects design to test treatments without a control group. In these designs, you usually compare one group’s outcomes before and after a treatment (instead of comparing outcomes between different groups).

For strong internal validity, it’s usually best to include a control group if possible. Without a control group, it’s harder to be certain that the outcome was caused by the experimental treatment and not by other variables.
What’s the difference between a questionnaire and a survey?: A questionnaire is a data collection tool or instrument, while a survey is an overarching research method that involves collecting and analysing data from people using questionnaires.
What is the definition of a Likert scale?: A Likert scale is a rating scale that quantitatively assesses opinions, attitudes, or behaviours. It is made up of four or more questions that measure a single attitude or trait when response scores are combined.

To use a Likert scale in a survey, you present participants with Likert-type questions or statements, and a continuum of items, usually with five or seven possible responses, to capture their degree of agreement.
Are Likert scales ordinal or interval scales?: Individual Likert-type questions are generally considered ordinal data, because the items have clear rank order, but don’t have an even distribution.

Overall Likert scale scores are sometimes treated as interval data. These scores are considered to have directionality and even spacing between them.

The type of data determines what statistical tests you should use to analyse your data.
What’s the difference between a research hypothesis and a statistical hypothesis?: A research hypothesis is your proposed answer to your research question. The research hypothesis usually includes an explanation (‘x affects y because …’).

A statistical hypothesis, on the other hand, is a mathematical statement about a population parameter. Statistical hypotheses always come in pairs: the null and alternative hypotheses. In a well-designed study, the statistical hypotheses correspond logically to the research hypothesis.
What is the definition of a hypothesis?: A hypothesis states your predictions about what your research will find. It is a tentative answer to your research question that has not yet been tested. For some research projects, you might have to write several hypotheses that address different aspects of your research question.

A hypothesis is not just a guess. It should be based on existing theories and knowledge. It also has to be testable, which means you can support or refute it through scientific research methods (such as experiments, observations, and statistical analysis of data).
Why do a cross-sectional study?: Cross-sectional studies are less expensive and time-consuming than many other types of study. They can provide useful insights into a population’s characteristics and identify correlations for further research.

Sometimes only cross-sectional data are available for analysis; other times your research question may only require a cross-sectional study to answer it.
What are the disadvantages of a cross-sectional study?: Cross-sectional studies cannot establish a cause-and-effect relationship or analyse behaviour over a period of time. To investigate cause and effect, you need to do a longitudinal study or an experimental study.
What is the difference between a longitudinal and a cross-sectional study?: Longitudinal studies and cross-sectional studies are two different types of research design. In a cross-sectional study you collect data from a population at a specific point in time; in a longitudinal study you repeatedly collect data from the same sample over an extended period of time.

Longitudinal study Cross-sectional study

Repeated observations Observations at a single point in time

Observes the same group multiple times Observes different groups (a ‘cross-section’) in the population

Follows changes in participants over time Provides snapshot of society at a given point
What are the pros and cons of a longitudinal study?: Longitudinal studies are better to establish the correct sequence of events, identify changes over time, and provide insight into cause-and-effect relationships, but they also tend to be more expensive and time-consuming than other types of studies.
What is an example of a longitudinal study?: The 1970 British Cohort Study, which has collected data on the lives of 17,000 Brits since their births in 1970, is one well-known example of a longitudinal study.
How long is a longitudinal study?: Longitudinal studies can last anywhere from weeks to decades, although they tend to be at least a year long.
What is the definition of a correlation?: A correlation reflects the strength and/or direction of the association between two or more variables.

A positive correlation means that both variables change in the same direction.

A negative correlation means that the variables change in opposite directions.

A zero correlation means there’s no relationship between the variables.
What is the definition of correlational research?: A correlational research design investigates relationships between two variables (or more) without the researcher controlling or manipulating any of them. It’s a non-experimental type of quantitative research.
What is the definition of a correlation coefficient?: A correlation coefficient is a single number that describes the strength and direction of the relationship between your variables.

Different types of correlation coefficients might be appropriate for your data based on their levels of measurement and distributions. The Pearson product-moment correlation coefficient (Pearson’s r) is commonly used to assess a linear relationship between two quantitative variables.
What’s the difference between correlational and experimental research?: Controlled experiments establish causality, whereas correlational studies only show associations between variables.

In an experimental design, you manipulate an independent variable and measure its effect on a dependent variable. Other variables are controlled so they can’t impact the results.

In a correlational design, you measure variables without manipulating any of them. You can test whether your variables change together, but you can’t be sure that one variable caused a change in another.

In general, correlational research is high in external validity while experimental research is high in internal validity.
Why doesn’t correlation imply causation?: The third variable and directionality problems are two main reasons why correlation isn’t causation.

The third variable problem means that a confounding variable affects both variables to make them seem causally related when they are not.

The directionality problem is when two variables correlate and might actually have a causal relationship, but it’s impossible to conclude which variable causes changes in the other.
What is social desirability bias?: Social desirability bias is the tendency for interview participants to give responses that will be viewed favourably by the interviewer or other participants. It occurs in all types of interviews and surveys, but is most common in semi-structured interviews, unstructured interviews, and focus groups.

Social desirability bias can be mitigated by ensuring participants feel at ease and comfortable sharing their views. Make sure to pay attention to your own body language and any physical or verbal cues, such as nodding or widening your eyes.

This type of bias in research can also occur in observations if the participants know they’re being observed. They might alter their behaviour accordingly.
What is the definition of a focus group?: A focus group is a research method that brings together a small group of people to answer questions in a moderated setting. The group is chosen due to predefined demographic traits, and the questions are designed to shed light on a topic of interest. It is one of four types of interviews.
What are the four main types of interviews?: The four most common types of interviews are:

Structured interviews: The questions are predetermined in both topic and order.

Semi-structured interviews: A few questions are predetermined, but other questions aren’t planned.

Unstructured interviews: None of the questions are predetermined.

Focus group interviews: The questions are presented to a group instead of one individual.
When should you use an unstructured interview?: An unstructured interview is the most flexible type of interview, but it is not always the best fit for your research topic.

Unstructured interviews are best used when:

You are an experienced interviewer and have a very strong background in your research topic, since it is challenging to ask spontaneous, colloquial questions

Your research question is exploratory in nature. While you may have developed hypotheses, you are open to discovering new or shifting viewpoints through the interview process.

You are seeking descriptive data, and are ready to ask questions that will deepen and contextualise your initial thoughts and hypotheses

Your research depends on forming connections with your participants and making them feel comfortable revealing deeper emotions, lived experiences, or thoughts
When should you use a semi-structured interview?: A semi-structured interview is a blend of structured and unstructured types of interviews. Semi-structured interviews are best used when:

You have prior interview experience. Spontaneous questions are deceptively challenging, and it’s easy to accidentally ask a leading question or make a participant uncomfortable.

Your research question is exploratory in nature. Participant answers can guide future research questions and help you develop a more robust knowledge base for future research.
What is an interviewer effect?: The interviewer effect is a type of bias that emerges when a characteristic of an interviewer (race, age, gender identity, etc.) influences the responses given by the interviewee.

There is a risk of an interviewer effect in all types of interviews, but it can be mitigated by writing really high-quality interview questions.
When should you use a structured interview?: A structured interview is a data collection method that relies on asking questions in a set order to collect data on a topic. They are often quantitative in nature. Structured interviews are best used when:

You already have a very clear understanding of your topic. Perhaps significant research has already been conducted, or you have done some prior research yourself, but you already possess a baseline for designing strong structured questions.

You are constrained in terms of time or resources and need to analyse your data quickly and efficiently

Your research question depends on strong parity between participants, with environmental conditions held constant

More flexible interview options include semi-structured interviews, unstructured interviews, and focus groups.
What are the benefits of collecting original data?: When conducting research, collecting original data has significant advantages:

You can tailor data collection to your specific research aims (e.g., understanding the needs of your consumers or user testing your website).

You can control and standardise the process for high reliability and validity (e.g., choosing appropriate measurements and sampling methods).

However, there are also some drawbacks: data collection can be time-consuming, labour-intensive, and expensive. In some cases, it’s more efficient to use secondary data that has already been collected by someone else, but the data might be less reliable.
What is data collection?: Data collection is the systematic process by which observations or measurements are gathered in research. It is used in many different contexts by academics, governments, businesses, and other organisations.
What’s the difference between a mediator and moderator?: A mediator variable explains the process through which two variables are related, while a moderator variable affects the strength and direction of that relationship.
What’s the difference between a mediator and a confounder?: A confounder is a third variable that affects variables of interest and makes them seem related when they are not. In contrast, a mediator is the mechanism of a relationship between two variables: it explains the process by which they are related.
How can you tell if something is a mediator?: If something is a mediating variable:

It’s caused by the independent variable

It influences the dependent variable

When it’s taken into account, the statistical correlation between the independent and dependent variables is higher than when it isn’t considered
Why should you include mediators and moderators in your study?: Including mediators and moderators in your research helps you go beyond studying a simple relationship between two variables for a fuller picture of the real world. They are important to consider when studying complex correlational or causal relationships.

Mediators are part of the causal pathway of an effect, and they tell you how or why an effect takes place. Moderators usually help you judge the external validity of your study by identifying the limitations of when the relationship between variables holds.
What are independent and dependent variables?: You can think of independent and dependent variables in terms of cause and effect: an independent variable is the variable you think is the cause, while a dependent variable is the effect.

In an experiment, you manipulate the independent variable and measure the outcome in the dependent variable. For example, in an experiment about the effect of nutrients on crop growth:

The independent variable is the amount of nutrients added to the crop field.

The dependent variable is the biomass of the crops at harvest time.

Defining your variables, and deciding how you will manipulate and measure them, is an important part of experimental design.
What’s the difference between discrete and continuous variables?: Discrete and continuous variables are two types of quantitative variables:

Discrete variables represent counts (e.g., the number of objects in a collection).

Continuous variables represent measurable amounts (e.g., water volume or weight).
What’s the difference between quantitative and categorical variables?: Quantitative variables are any variables where the data represent amounts (e.g. height, weight, or age).

Categorical variables are any variables where the data represent groups. This includes rankings (e.g. finishing places in a race), classifications (e.g. brands of cereal), and binary outcomes (e.g. coin flips).

You need to know what type of variables you are working with to choose the right statistical test for your data and interpret your results.
Why are independent and dependent variables important?: Determining cause and effect is one of the most important parts of scientific research. It’s essential to know which is the cause – the independent variable – and which is the effect – the dependent variable.
What is an example of an independent and dependent variable?: You want to find out how blood sugar levels are affected by drinking diet cola and regular cola, so you conduct an experiment.

The type of cola – diet or regular – is the independent variable.

The level of blood sugar that you measure is the dependent variable – it changes depending on the type of cola.
Can a variable be both independent and dependent?: No. The value of a dependent variable depends on an independent variable, so a variable cannot be both independent and dependent at the same time. It must be either the cause or the effect, not both.
Can I include more than one independent or dependent variable in a study?: Yes, but including more than one of either type requires multiple research questions.

For example, if you are interested in the effect of a diet on health, you can use multiple measures of health: blood sugar, blood pressure, weight, pulse, and many more. Each of these is its own dependent variable with its own research question.

You could also choose to look at the effect of exercise levels as well as diet, or even the additional effect of the two combined. Each of these is a separate independent variable.

To ensure the internal validity of an experiment, you should only change one independent variable at a time.
Why do confounding variables matter for my research?: To ensure the internal validity of your research, you must consider the impact of confounding variables. If you fail to account for them, you might over- or underestimate the causal relationship between your independent and dependent variables, or even find a causal relationship where none exists.
What’s the difference between confounding, independent, and dependent variables?: A confounding variable is closely related to both the independent and dependent variables in a study. An independent variable represents the supposed cause, while the dependent variable is the supposed effect. A confounding variable is a third variable that influences both the independent and dependent variables.

Failing to account for confounding variables can cause you to wrongly estimate the relationship between your independent and dependent variables.
How do I prevent confounding variables from interfering with my research?: There are several methods you can use to decrease the impact of confounding variables on your research: restriction, matching, statistical control, and randomisation.

In restriction, you restrict your sample by only including certain subjects that have the same values of potential confounding variables.

In matching, you match each of the subjects in your treatment group with a counterpart in the comparison group. The matched subjects have the same values on any potential confounding variables, and only differ in the independent variable.

In statistical control, you include potential confounders as variables in your regression.

In randomisation, you randomly assign the treatment (or independent variable) in your study to a sufficiently large number of subjects, which allows you to control for all potential confounding variables.
What’s the difference between concepts, variables and indicators?: In scientific research, concepts are the abstract ideas or phenomena that are being studied (e.g., educational achievement). Variables are properties or characteristics of the concept (e.g., performance at school), while indicators are ways of measuring or quantifying variables (e.g., yearly grade reports).

The process of turning abstract concepts into measurable variables and indicators is called operationalisation.
Are ordinal variables categorical or quantitative?: In statistics, ordinal and nominal variables are both considered categorical variables.

Even though ordinal data can sometimes be numerical, not all mathematical operations can be performed on them.
What’s the definition of a control variable?: A control variable is any variable that’s held constant in a research study. It’s not a variable of interest in the study, but it’s controlled because it could influence the outcomes.
Why are control variables important?: Control variables help you establish a correlational or causal relationship between variables by enhancing internal validity.

If you don’t control relevant extraneous variables, they may influence the outcomes of your study, and you may not be able to demonstrate that your results are really an effect of your independent variable.
What does ‘controlling for a variable’ mean?: ‘Controlling for a variable’ means measuring extraneous variables and accounting for them statistically to remove their effects on other variables.

Researchers often model control variable data along with independent and dependent variable data in regression analyses and ANCOVAs. That way, you can isolate the control variable’s effects from the relationship between the variables of interest.
What’s the difference between extraneous and confounding variables?: An extraneous variable is any variable that you’re not investigating that can potentially affect the dependent variable of your research study.

A confounding variable is a type of extraneous variable that not only affects the dependent variable, but is also related to the independent variable.
What are the types of extraneous variables?: There are 4 main types of extraneous variables:

Demand characteristics: Environmental cues that encourage participants to conform to researchers’ expectations

Experimenter effects: Unintentional actions by researchers that influence study outcomes

Situational variables: Eenvironmental variables that alter participants’ behaviours

Participant variables: Any characteristic or aspect of a participant’s background that could affect study results
What are explanatory and response variables?: The difference between explanatory and response variables is simple:

An explanatory variable is the expected cause, and it explains the results.

A response variable is the expected effect, and it responds to other variables.
How do explanatory variables differ from independent variables?: The term ‘explanatory variable‘ is sometimes preferred over ‘independent variable‘ because, in real-world contexts, independent variables are often influenced by other variables. This means they aren’t totally independent.

Multiple independent variables may also be correlated with each other, so ‘explanatory variables’ is a more appropriate term.
How do you plot explanatory and response variables on a graph?: On graphs, the explanatory variable is conventionally placed on the x-axis, while the response variable is placed on the y-axis.

If you have quantitative variables, use a scatterplot or a line graph.

If your response variable is categorical, use a scatterplot or a line graph.

If your explanatory variable is categorical, use a bar graph.
How many variables are in a correlation?: A correlation is usually tested for two variables at a time, but you can test correlations between three or more variables.
What’s the definition of an independent variable?: An independent variable is the variable you manipulate, control, or vary in an experimental study to explore its effects. It’s called ‘independent’ because it’s not influenced by any other variables in the study.

Independent variables are also called:

Explanatory variables (they explain an event or outcome)

Predictor variables (they can be used to predict the value of a dependent variable)

Right-hand-side variables (they appear on the right-hand side of a regression equation)
What’s the definition of a dependent variable?: A dependent variable is what changes as a result of the independent variable manipulation in experiments. It’s what you’re interested in measuring, and it ‘depends’ on your independent variable.

In statistics, dependent variables are also called:

Response variables (they respond to a change in another variable)

Outcome variables (they represent the outcome you want to measure)

Left-hand-side variables (they appear on the left-hand side of a regression equation)
How do you use deductive reasoning in research?: Deductive reasoning is commonly used in scientific research, and it’s especially associated with quantitative research.

In research, you might have come across something called the hypothetico-deductive method. It’s the scientific method of testing hypotheses to check whether your predictions are substantiated by real-world data.
What is the definition of deductive reasoning?: Deductive reasoning is a logical approach where you progress from general ideas to specific conclusions. It’s often contrasted with inductive reasoning, where you start with specific observations and form general conclusions.

Deductive reasoning is also called deductive logic.
What is the definition of inductive reasoning?: Inductive reasoning is a method of drawing conclusions by going from the specific to the general. It’s usually contrasted with deductive reasoning, where you proceed from general information to specific conclusions.

Inductive reasoning is also called inductive logic or bottom-up reasoning.
How is inductive reasoning used in research?: In inductive research, you start by making observations or gathering data. Then, you take a broad scan of your data and search for patterns. Finally, you make general conclusions that you might incorporate into theories.
What’s the difference between inductive and deductive reasoning?: Inductive reasoning is a bottom-up approach, while deductive reasoning is top-down.

Inductive reasoning takes you from the specific to the general, while in deductive reasoning, you make inferences by going from general premises to specific conclusions.
What are some types of inductive reasoning?: There are many different types of inductive reasoning that people use formally or informally.

Here are a few common types:

Inductive generalisation: You use observations about a sample to come to a conclusion about the population it came from.

Statistical generalisation: You use specific numbers about samples to make statements about populations.

Causal reasoning: You make cause-and-effect links between different things.

Sign reasoning: You make a conclusion about a correlational relationship between different things.

Analogical reasoning: You make a conclusion about something based on its similarities to something else.
Who should assess face validity?: It’s often best to ask a variety of people to review your measurements. You can ask experts, such as other researchers, or laypeople, such as potential participants, to judge the face validity of tests.

While experts have a deep understanding of research methods, the people you’re studying can provide you with valuable insights you may have missed otherwise.
Why is face validity important?: Face validity is important because it’s a simple first step to measuring the overall validity of a test or technique. It’s a relatively intuitive, quick, and easy way to start checking whether a new measure seems useful at first glance.

Good face validity means that anyone who reviews your measure says that it seems to be measuring what it’s supposed to. With poor face validity, someone reviewing your measure may be left confused about what you’re measuring and why you’re using this method.
What is the definition of face validity?: Face validity is about whether a test appears to measure what it’s supposed to measure. This type of validity is concerned with whether a measure seems relevant and appropriate for what it’s assessing only on the surface.
How do I measure construct validity?: Statistical analyses are often applied to test validity with data from your measures. You test convergent validity and discriminant validity with correlations to see if results from your test are positively or negatively related to those of other established tests.

You can also use regression analyses to assess whether your measure is actually predictive of outcomes that you expect it to predict theoretically. A regression analysis that supports your expectations strengthens your claim of construct validity.
Why does construct validity matter?: When designing or evaluating a measure, construct validity helps you ensure you’re actually measuring the construct you’re interested in. If you don’t have construct validity, you may inadvertently measure unrelated or distinct constructs and lose precision in your research.

Construct validity is often considered the overarching type of measurement validity, because it covers all of the other types. You need to have face validity, content validity, and criterion validity to achieve construct validity.
What is the definition of construct validity?: Construct validity is about how well a test measures the concept it was designed to evaluate. It’s one of four types of measurement validity, which includes construct validity, face validity, and criterion validity.

There are two subtypes of construct validity.

Convergent validity: The extent to which your measure corresponds to measures of related constructs

Discriminant validity: The extent to which your measure is unrelated or negatively related to measures of distinct constructs
How does attrition threaten external validity?: Attrition bias can skew your sample so that your final sample differs significantly from your original sample. Your sample is biased because some groups from your population are underrepresented.

With a biased final sample, you may not be able to generalise your findings to the original population that you sampled from, so your external validity is compromised.
What are threats to external validity?: There are seven threats to external validity: selection bias, history, experimenter effect, Hawthorne effect, testing effect, aptitude-treatment, and situation effect.
What are the two types of external validity?: The two types of external validity are population validity (whether you can generalise to other groups of people) and ecological validity (whether you can generalise to other situations and settings).
What is external validity?: The external validity of a study is the extent to which you can generalise your findings to different groups of people, situations, and measures.
How does attrition threaten internal validity?: Attrition bias is a threat to internal validity. In experiments, differential rates of attrition between treatment and control groups can skew results.

This bias can affect the relationship between your independent and dependent variables. It can make variables appear to be correlated when they are not, or vice versa.
What is internal validity?: Internal validity is the extent to which you can be confident that a cause-and-effect relationship established in a study cannot be explained by other factors.
What are threats to internal validity?: There are eight threats to internal validity: history, maturation, instrumentation, testing, selection bias, regression to the mean, social interaction, and attrition.
What is sampling error?: A sampling error is the difference between a population parameter and a sample statistic.
What’s the difference between a statistic and a parameter?: A statistic refers to measures about the sample, while a parameter refers to measures about the population.
When are populations used in research?: Populations are used when a research question requires data from every member of the population. This is usually only feasible when the population is small and easily accessible.
What is systematic sampling?: Systematic sampling is a probability sampling method where researchers select members of the population at a regular interval – for example, by selecting every 15th person on a list of the population. If the population is in a random order, this can imitate the benefits of simple random sampling.
How do I perform systematic sampling?: There are three key steps in systematic sampling:

Define and list your population, ensuring that it is not ordered in a cyclical or periodic order.

Decide on your sample size and calculate your interval, k, by dividing your population by your target sample size.

Choose every kth member of the population as your sample.
Can I stratify by multiple characteristics at once?: Yes, you can create a stratified sample using multiple characteristics, but you must ensure that every participant in your study belongs to one and only one subgroup. In this case, you multiply the numbers of subgroups for each characteristic to get the total number of groups.

For example, if you were stratifying by location with three subgroups (urban, rural, or suburban) and marital status with five subgroups (single, divorced, widowed, married, or partnered), you would have 3 × 5 = 15 subgroups.
When do I use stratified sampling?: You should use stratified sampling when your sample can be divided into mutually exclusive and exhaustive subgroups that you believe will take on different mean values for the variable that you’re studying.

Using stratified sampling will allow you to obtain more precise (with lower variance) statistical estimates of whatever you are trying to measure.

For example, say you want to investigate how income differs based on educational attainment, but you know that this relationship can vary based on race. Using stratified sampling, you can ensure you obtain a large enough sample from each racial group, allowing you to draw more precise conclusions.
What is stratified sampling?: In stratified sampling, researchers divide subjects into subgroups called strata based on characteristics that they share (e.g., race, gender, educational attainment).

Once divided, each subgroup is randomly sampled using another probability sampling method.
What are the pros and cons of multistage sampling?: Multistage sampling can simplify data collection when you have large, geographically spread samples, and you can obtain a probability sample without a complete sampling frame.

But multistage sampling may not lead to a representative sample, and larger samples are needed for multistage samples to achieve the statistical properties of simple random samples.
Is multistage sampling a probability or non-probability sampling method?: In multistage sampling, you can use probability or non-probability sampling methods.

For a probability sample, you have to probability sampling at every stage. You can mix it up by using simple random sampling, systematic sampling, or stratified sampling to select units at different stages, depending on what is applicable and relevant to your study.
What is cluster sampling?: Cluster sampling is a probability sampling method in which you divide a population into clusters, such as districts or schools, and then randomly select some of these clusters as your sample.

The clusters should ideally each be mini-representations of the population as a whole.
What are the types of cluster sampling?: There are three types of cluster sampling: single-stage, double-stage and multi-stage clustering. In all three types, you first divide the population into clusters, then randomly select clusters for use in your sample.

In single-stage sampling, you collect data from every unit within the selected clusters.

In double-stage sampling, you select a random sample of units from within the clusters.

In multi-stage sampling, you repeat the procedure of randomly sampling elements from within the clusters until you have reached a manageable sample.
What are some advantages and disadvantages of cluster sampling?: Cluster sampling is more time- and cost-efficient than other probability sampling methods, particularly when it comes to large samples spread across a wide geographical area.

However, it provides less statistical certainty than other methods, such as simple random sampling, because it is difficult to ensure that your clusters properly represent the population as a whole.
When should I use simple random sampling?: If properly implemented, simple random sampling is usually the best sampling method for ensuring both internal and external validity. However, it can sometimes be impractical and expensive to implement, depending on the size of the population to be studied,

If you have a list of every member of the population and the ability to reach whichever members are selected, you can use simple random sampling.
What is an example of simple random sampling?: The American Community Survey is an example of simple random sampling. In order to collect detailed data on the population of the US, the Census Bureau officials randomly select 3.5 million households per year and use a variety of methods to convince them to fill out the survey.
What is simple random sampling?: Simple random sampling is a type of probability sampling in which the researcher randomly selects a subset of participants from a population. Each member of the population has an equal chance of being selected. Data are then collected from as large a percentage as possible of this random subset.
What is sampling bias?: Sampling bias occurs when some members of a population are systematically more likely to be selected in a sample than others.
What is multistage sampling?: In multistage sampling, or multistage cluster sampling, you draw a sample from a population using smaller and smaller groups at each stage.

This method is often used to collect data from a large, geographically spread group of people in national surveys, for example. You take advantage of hierarchical groupings (e.g., from county to city to neighbourhood) to create a sample that’s less expensive and time-consuming to collect data from.
What is non-probability sampling?: In non-probability sampling, the sample is selected based on non-random criteria, and not every member of the population has a chance of being included.

Common non-probability sampling methods include convenience sampling, voluntary response sampling, purposive sampling, snowball sampling, and quota sampling.
What is probability sampling?: Probability sampling means that every member of the target population has a known chance of being included in the sample.

Probability sampling methods include simple random sampling, systematic sampling, stratified sampling, and cluster sampling.
Why are samples used in research?: Samples are used to make inferences about populations. Samples are easier to collect data from because they are practical, cost-effective, convenient, and manageable.
What are the pros and cons of a between-subjects design?: While a between-subjects design has fewer threats to internal validity, it also requires more participants for high statistical power than a within-subjects design.

Advantages:

Prevents carryover effects of learning and fatigue.

Shorter study duration.

Disadvantages:

Needs larger samples for high power.

Uses more resources to recruit participants, administer sessions, cover costs, etc.

Individual differences may be an alternative explanation for results.
What is a factorial design?: In a factorial design, multiple independent variables are tested.

If you test two variables, each level of one independent variable is combined with each level of the other independent variable to create different conditions.
Can I use a within- and between-subjects design in the same study?: Yes. Between-subjects and within-subjects designs can be combined in a single study when you have two or more independent variables (a factorial design). In a mixed factorial design, one variable is altered between subjects and another is altered within subjects.
What are the pros and cons of a within-subjects design?: Within-subjects designs have many potential threats to internal validity, but they are also very statistically powerful.

Advantages:

Only requires small samples

Statistically powerful

Removes the effects of individual differences on the outcomes

Disadvantages:

Internal validity threats reduce the likelihood of establishing a direct relationship between variables

Time-related effects, such as growth, can influence the outcomes

Carryover effects mean that the specific order of different treatments affect the outcomes
When should I use a quasi-experimental design?: Quasi-experimental design is most useful in situations where it would be unethical or impractical to run a true experiment.

Quasi-experiments have lower internal validity than true experiments, but they often have higher external validity as they can use real-world interventions instead of artificial laboratory settings.
What is random assignment?: In experimental research, random assignment is a way of placing participants from your sample into different groups using randomisation. With this method, every member of the sample has a known or equal chance of being placed in a control group or an experimental group.
What is a quasi-experiment?: A quasi-experiment is a type of research design that attempts to establish a cause-and-effect relationship. The main difference between this and a true experiment is that the groups are not randomly assigned.
What’s the difference between within-subjects and between-subjects designs?: In a between-subjects design, every participant experiences only one condition, and researchers assess group differences between participants in various conditions.

In a within-subjects design, each participant experiences all conditions, and researchers test the same participants repeatedly for differences between conditions.

The word ‘between’ means that you’re comparing different conditions between groups, while the word ‘within’ means you’re comparing different conditions within the same group.
What is a confounding variable?: A confounding variable, also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design, it’s important to identify potential confounding variables and plan how you will reduce their impact.
What are the pros and cons of triangulation?: Triangulation can help:

Reduce bias that comes from using a single method, theory, or investigator

Enhance validity by approaching the same topic with different tools

Establish credibility by giving you a complete picture of the research problem

But triangulation can also pose problems:

It’s time-consuming and labour-intensive, often involving an interdisciplinary team.

Your results may be inconsistent or even contradictory.
What are the types of triangulation?: There are four main types of triangulation:

Data triangulation: Using data from different times, spaces, and people

Investigator triangulation: Involving multiple researchers in collecting or analysing data

Theory triangulation: Using varying theoretical perspectives in your research

Methodological triangulation: Using different methodologies to approach the same topic
What is the definition of an experimental design?: Experimental designs are a set of procedures that you plan in order to examine the relationship between variables that interest you.

To design a successful experiment, first identify:

A testable hypothesis

One or more independent variables that you will manipulate

One or more dependent variables that you will measure

When designing the experiment, first decide:

How your variable(s) will be manipulated

How you will control for any potential confounding or lurking variables

How many subjects you will include

How you will assign treatments to your subjects
What’s the difference between exploratory and explanatory research?: Exploratory research explores the main aspects of a new or barely researched question.

Explanatory research explains the causes and effects of an already widely researched question.
How does an observational study differ from an experiment?: The key difference between observational studies and experiments is that, done correctly, an observational study will never influence the responses or behaviours of participants. Experimental designs will have a treatment condition applied to at least a portion of participants.
How do you define an observational study?: An observational study could be a good fit for your research if your research question is based on things you observe. If you have ethical, logistical, or practical concerns that make an experimental design challenging, consider an observational study. Remember that in an observational study, it is critical that there be no interference or manipulation of the research subjects. Since it’s not an experiment, there are no control or treatment groups either.
What are the main types of mixed methods research designs?: These are four of the most common mixed methods designs:

Convergent parallel: Quantitative and qualitative data are collected at the same time and analysed separately. After both analyses are complete, compare your results to draw overall conclusions.

Embedded: Quantitative and qualitative data are collected at the same time, but within a larger quantitative or qualitative design. One type of data is secondary to the other.

Explanatory sequential: Quantitative data is collected and analysed first, followed by qualitative data. You can use this design if you think your qualitative data will explain and contextualise your quantitative findings.

Exploratory sequential: Qualitative data is collected and analysed first, followed by quantitative data. You can use this design if you think the quantitative data will confirm or validate your qualitative findings.
What is triangulation in research?: Triangulation in research means using multiple datasets, methods, theories and/or investigators to address a research question. It’s a research strategy that can help you enhance the validity and credibility of your findings.

Triangulation is mainly used in qualitative research, but it’s also commonly applied in quantitative research. Mixed methods research always uses triangulation.
What is operationalisation?: Operationalisation means turning abstract conceptual ideas into measurable observations.

For example, the concept of social anxiety isn’t directly observable, but it can be operationally defined in terms of self-rating scores, behavioural avoidance of crowded places, or physical anxiety symptoms in social situations.

Before collecting data, it’s important to consider how you will operationalise the variables that you want to measure.
What is hypothesis testing?: Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics. It is used by scientists to test specific predictions, called hypotheses, by calculating how likely it is that a pattern or relationship between variables could have arisen by chance.
What are the main qualitative research approaches?: There are five common approaches to qualitative research:

Grounded theory involves collecting data in order to develop new theories.

Ethnography involves immersing yourself in a group or organisation to understand its culture.

Narrative research involves interpreting stories to understand how people make sense of their experiences and perceptions.

Phenomenological research involves investigating phenomena through people’s lived experiences.

Action research links theory and practice in several cycles to drive innovative changes.
How do I analyse qualitative data?: There are various approaches to qualitative data analysis, but they all share five steps in common:

Prepare and organise your data.

Review and explore your data.

Develop a data coding system.

Assign codes to the data.

Identify recurring themes.

The specifics of each step depend on the focus of the analysis. Some common approaches include textual analysis, thematic analysis, and discourse analysis.
What is data collection?: Data collection is the systematic process by which observations or measurements are gathered in research. It is used in many different contexts by academics, governments, businesses, and other organisations.
What is mixed methods research?: In mixed methods research, you use both qualitative and quantitative data collection and analysis methods to answer your research question.
What’s the difference between method and methodology?: Methodology refers to the overarching strategy and rationale of your research project. It involves studying the methods used in your field and the theories or principles behind them, in order to develop an approach that matches your objectives.

Methods are the specific tools and procedures you use to collect and analyse data (e.g. experiments, surveys, and statistical tests).

In shorter scientific papers, where the aim is to report the findings of a specific study, you might simply describe what you did in a methods section.

In a longer or more complex research project, such as a thesis or dissertation, you will probably include a methodology section, where you explain your approach to answering the research questions and cite relevant sources to support your choice of methods.
How do I decide which research methods to use?: The research methods you use depend on the type of data you need to answer your research question.

If you want to measure something or test a hypothesis, use quantitative methods. If you want to explore ideas, thoughts, and meanings, use qualitative methods.

If you want to analyse a large amount of readily available data, use secondary data. If you want data specific to your purposes with control over how they are generated, collect primary data.

If you want to establish cause-and-effect relationships between variables, use experimental methods. If you want to understand the characteristics of a research subject, use descriptive methods.

Longitudinal study	Cross-sectional study
Repeated observations	Observations at a single point in time
Observes the same group multiple times	Observes different groups (a ‘cross-section’) in the population
Follows changes in participants over time	Provides snapshot of society at a given point

Questions?

Ask our team

Want to contact us directly? No problem. We are always here for you.

Frequently asked questions

See all

How can I contact Scribbr?: Our support team is here to help you daily via chat, WhatsApp, email, or phone between 9:00 a.m. to 11:00 p.m. CET.
Can I choose between the 6th and 7th editions of APA Style?: Our APA experts default to APA 7 for editing and formatting. For the Citation Editing Service you are able to choose between APA 6 and 7.
Can I get a sample edit?: Yes, if your document is longer than 20,000 words, you will get a sample of approximately 2,000 words. This sample edit gives you a first impression of the editor’s editing style and a chance to ask questions and give feedback.

How does the sample edit work?

You will receive the sample edit within 24 hours after placing your order. You then have 24 hours to let us know if you’re happy with the sample or if there’s something you would like the editor to do differently.

Read more about how the sample edit works
Can I upload my document in sections?: Yes, you can upload your document in sections.

We try our best to ensure that the same editor checks all the different sections of your document. When you upload a new file, our system recognizes you as a returning customer, and we immediately contact the editor who helped you before.

However, we cannot guarantee that the same editor will be available. Your chances are higher if

You send us your text as soon as possible and

You can be flexible about the deadline.

Please note that the shorter your deadline is, the lower the chance that your previous editor is not available.

If your previous editor isn’t available, then we will inform you immediately and look for another qualified editor. Fear not! Every Scribbr editor follows the Scribbr Improvement Model and will deliver high-quality work.
Can I have my document edited during weekends and holidays?: Yes, our editors also work during the weekends and holidays.

Because we have many editors available, we can check your document 24 hours per day and 7 days per week, all year round.

If you choose a 72 hour deadline and upload your document on a Thursday evening, you’ll have your thesis back by Sunday evening!
English is not my first language. Can you fix all my mistakes?: Yes! Our editors are all native speakers, and they have lots of experience editing texts written by ESL students. They will make sure your grammar is perfect and point out any sentences that are difficult to understand. They’ll also notice your most common mistakes, and give you personal feedback to improve your writing in English.
What types of editing does Scribbr offer?: Every Scribbr order comes with our award-winning Proofreading & Editing service, which combines two important stages of the revision process.

For a more comprehensive edit, you can add a Structure Check or Clarity Check to your order. With these building blocks, you can customize the kind of feedback you receive.

You might be familiar with a different set of editing terms. To help you understand what you can expect at Scribbr, we created this table:

Types of editing Available at Scribbr?

Proofreading
Correction of superficial mistakes, such as typos, misspellings, punctuation errors and consistency errors. Yes!
This is the “proofreading” in Scribbr’s standard service. It can only be selected in combination with editing.

Copy editing
Focus on grammar, syntax, style, tone and the conventions of the field. The editor also considers the internal logic of the text and flags any obvious contradictions. Yes!
This is the “editing” in Scribbr’s standard service. It can only be selected in combination with proofreading.

Line editing
Focus on language, style, concision and choices. The editor helps you strengthen your story, polish your sentences and ensure that your use of language drives home your ideas. Yes!
Select the Structure Check and Clarity Check to receive a comprehensive edit equivalent to a line edit.

Developmental editing (i.e. content editing, substantive editing)
This is the first step of the editing process and applies to very early drafts. The editor helps you structure your ideas, decide what story to tell and find direction for your writing. No.
This kind of editing involves heavy rewriting and restructuring. Our editors cannot help with this.

View an example
Is the editor an expert in my field of study?: When you place an order, you can specify your field of study and we’ll match you with an editor who has familiarity with this area.

However, our editors are language specialists, not academic experts in your field. Your editor’s job is not to comment on the content of your dissertation, but to improve your language and help you express your ideas as clearly and fluently as possible.

This means that your editor will understand your text well enough to give feedback on its clarity, logic and structure, but not on the accuracy or originality of its content.

Good academic writing should be understandable to a non-expert reader, and we believe that academic editing is a discipline in itself. The research, ideas and arguments are all yours – we’re here to make sure they shine!
How do I receive my document when the editor has finished proofreading?: After your document has been edited, you will receive an email with a link to download the document.

The editor has made changes to your document using ‘Track Changes’ in Word. This means that you only have to accept or ignore the changes that are made in the text one by one.

It is also possible to accept all changes at once. However, we strongly advise you not to do so for the following reasons:

You can learn a lot by looking at the mistakes you made.

The editors don’t only change the text – they also place comments when sentences or sometimes even entire paragraphs are unclear. You should read through these comments and take into account your editor’s tips and suggestions.

With a final read-through, you can make sure you’re 100% happy with your text before you submit!
I have a tight deadline. Can you edit my document in time?: You choose the turnaround time when ordering. We can return your dissertation within 24 hours, 3 days or 1 week. These timescales include weekends and holidays. As soon as you’ve paid, the deadline is set, and we guarantee to meet it! We’ll notify you by text and email when your editor has completed the job.

Very large orders might not be possible to complete in 24 hours. On average, our editors can complete around 13,000 words in a day while maintaining our high quality standards. If your order is longer than this and urgent, contact us to discuss possibilities.

Always leave yourself enough time to check through the document and accept the changes before your submission deadline.
What type of documents does Scribbr proofread?: Scribbr is specialised in editing study related documents. We check:

PhD Theses

Graduation projects

Dissertations

Essays

Admissions essays

College essays

Application essays

Personal statements

Reports

Process reports

Reflections

Internship reports

Academic papers

Interviews

Proposals

Research proposals

Prospectuses

Calculate the costs
How fast can Scribbr proofread my document?: The fastest turnaround time is 24 hours.

You can upload your document at any time and choose between four deadlines:

Same day delivery

3 hours

6 hours

12 hours

24 hours

3 days

7 days
What is Scribbr’s 100% happiness guarantee?: At Scribbr, we promise to make every customer 100% happy with the service we offer. Our philosophy: Your complaint is always justified – no denial, no doubts.

Our customer support team is here to find the solution that helps you the most, whether that’s a free new edit or a refund for the service.
Can I choose between American, British and Australian English?: Yes, in the order process you can indicate your preference for American, British, or Australian English.

If you don’t choose one, your editor will follow the style of English you currently use. If your editor has any questions about this, we will contact you.

Types of editing	Available at Scribbr?
Proofreading Correction of superficial mistakes, such as typos, misspellings, punctuation errors and consistency errors.	Yes! This is the “proofreading” in Scribbr’s standard service. It can only be selected in combination with editing.
Copy editing Focus on grammar, syntax, style, tone and the conventions of the field. The editor also considers the internal logic of the text and flags any obvious contradictions.	Yes! This is the “editing” in Scribbr’s standard service. It can only be selected in combination with proofreading.
Line editing Focus on language, style, concision and choices. The editor helps you strengthen your story, polish your sentences and ensure that your use of language drives home your ideas.	Yes! Select the Structure Check and Clarity Check to receive a comprehensive edit equivalent to a line edit.
Developmental editing (i.e. content editing, substantive editing) This is the first step of the editing process and applies to very early drafts. The editor helps you structure your ideas, decide what story to tell and find direction for your writing.	No. This kind of editing involves heavy rewriting and restructuring. Our editors cannot help with this.

Frequently asked questions

How do you write focus group questions?

Frequently asked questions: Methodology

Questions?

Ask our team

Frequently asked questions

How does the sample edit work?